MSZ95 Injection Blow Molding Machine
/// Techhnical Features:
Both perform and blow station use 3-cylinder clamping unit,mould open speed high,production capacity high.
Dual hydraulic system with servo pump drive,more precision control on clamping ,and energy saving more than 25%.
Horizontal injection design,plasticating reliable and operation easy.
Trigon beam make the structure strong and moving stable.
| No. of cavities | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 |
| Neck Diameter（mm） | 45 | 40 | 35 | 35 | 30 | 25 | 25 | 20 |
| Body Diameter（mm） | 80 | 60 | 50 | 45 | 40 | 35 | 30 | 25 |
| Max. Height（mm） | 220 | 180 | 140 | 100 | 80 | 70 | 60 | 50 |
| Max. Volum（ml） | 1000 | 400 | 200 | 100 | 60 | 40 | 30 | 20 |
| Injection system | Unit | MSZ95 | |
| Screw Diameter | mm | 60 | 65 |
| Screw L/D | L/D | 23：1 | 23：1 |
| Injection weight(HDPE) | g | 535 | 625 |
| Max.screw speed | rpm | 10-235 | |
| Heating capacity | KW | 12.6 | |
| Clamping system | |||
| Clamping force of injection | KN | 931 | |
| Clamping force of blowing | KN | 176 | |
| Max.Platen size(L*W) | mm | 900×480 | |
| Min.Mold thickness(H) | mm | 280 | |
| Heating capacity of mould | KW | 8 | |
| Stripping system | |||
| Stripping stroke | mm | 240 | |
| Dry cycle | sec | 4 | |
| Driving system | |||
| Motor power | KW | 45+5.5 | |
| Hydraulic pressure | Mpa | 14 | |
| Product range | |||
| Suitable bottle range | ml | 5-800 | |
| Max.bottle height | mm | ≤220 | |
| Max.Dia.of bottle | mm | ≤100 | |
| Others | |||
| Min.Air pressure | Mpa | 1.0 | |
| Discharge rate of compressed air | M³/min | ≥1 | |
| Water flowage | M³/h | 6 | |
| Total rated power with mold heating | KW | 71.1 | |
| Dimension(L*W*H) | M | 4.5×2.1×2.7 | |
| Net weight | ton | 12 | |